|
||
|
||
|
||
 |
 |
 The
short wire path is extremely user friendly andeasily maintained. |
The
wire threading is convenient and efficient, "DIRECT DROPPING" method is
trouble free and easy to maintain. |
|
Machine
specification
|
| MODEL | DW-342 | DW-352 | DW-432 | DW-452 | DW-483 | DW-983 | |
| Max.
workpiece size (WxDxH) |
mm (in) |
1000x600x200
(39 3/8x23 5/8x7 7/8) |
1100x600x200
(43 1/4x23 5/8x7 7/8) |
800x500x200
(31 1/2x19 11/16x7 7/8) |
700x800x250 (27 9/16x31 1/2x9 13/16) |
1000x800x300 (39 3/8x31 1/2x11 13/16) |
1300x1000x300 (51 3/16x39 3/8x11 13/16) |
| Max. workpiece weight | kgs (lbs) |
600(1320) | 600(1320) | 600(1320) | 1000(2200) | 1600(3520) | 2000(4400) |
| X,Y axes travel | mm (in) |
400x300
(15 3/4x11 13/16) |
500x300
(19 11/16x11 13/16) |
400x300
(15 3/4x11 13/16) |
400x500 (15 3/4x19 11/16) |
400x800
(15 3/4x31 1/2) |
900x800
(35 7/16x31 1/2) |
| Z axis travel | mm (in) |
200(7
7/8) [380(14 24/25)] |
200(7
7/8) [380(14 24/25)] |
200(7
7/8) [380(14 24/25)] |
250(9
7/8) [480(18 8/9)] |
300(11
13/16) [580(22 21/25)] |
300(11
13/16) [580(22 21/25)] |
| U,V axes travel | mm (in) |
100x100 (3 15/16x3 15/16) |
100x100 (3 15/16x3 15/16) |
100x100 (3 15/16x3 15/16) |
100x100 (3 15/16x3 15/16) |
100x100 (3 15/16x3 15/16) |
100x100 (3 15/16x3 15/16) |
| Max. output current | A | 40 | 40 | 40 | 40 | 40 | 40 |
| Max, power consumption | KV | 8 | 8 | 8 | 10 | 10 | 12 |
| Best surface roughness | um | Ra 0.35 | Ra 0.35 | Ra 0.35 | Ra 0.35 | Ra 0.35 | Ra 0.35 |
| Machine dimensions(WxDxH) | mm (in) |
2200x2000x2100 (86 5/8x78 3/4x82 5/8) |
2200x2000x2100 (86 5/8x78 3/4x82 5/8) |
2200x2000x2100 (86 5/8x78 3/4x82 5/8) |
2200x2200x2400 (86 5/8x86 5/8x94 1/2) |
2200x2800x2400 (86 5/8x110 1/4x94 1/2) |
2800x2800x2400 (110 1/4x110 1/4x94 1/2) |
| Machine weight | mm (in) |
 2000(4400) |
2000(4400) |
2800(6160) |
3200(7040) |
4800(10560) |
5600(12320) |
| MODEL | DW-432 / 452 / 483 /983 | |
|
Work table moving
speed |
mm/min (in/min)
|
1000(39.37) |
|
mm/min (in/min)
|
0.001~50(0.00004~1.97) | |
|
mm/min (in/min)
|
________ | |
| Wire dia. |
mm(in)
|
0.1~0.3(0.004~0.012) |
| Wire tension |
gf(lb)
|
200~2500(0.44~5.5) |
| Wire feeding speed |
mm/sec(in/sec)
|
0~300(0~11.81) |
| Max,
cutting speed (w/wire dia. 0.25mm) |
mm2/min
(in2/min)
|
150(0.233) |
| Max. cutting taper angle |
./mm( ./in)
|
กำ22/100(กำ22/3 15/16) |
|
|||
